Skip to content

Stop a Robot

Goal: Stop a single robot, or stop every robot in the fleet at once.

Before you begin

  • You need permission to stop robots (typically Fleet Operator, Fleet Planner, or Fleet Manager).
  • Stop All sends a stop command to every robot in the currently selected fleet.

Stop a single robot

  1. In the top navigation, click PathLab.
  2. Select the robot you want to stop (from the Robots panel or by clicking it on the map) to open its detail panel.
  3. Click Stop in the robot's detail panel.

Stop every robot in the fleet

  1. In the top navigation, click PathLab.
  2. On the toolbar, click Stop All.
  3. A confirmation shows the stop command was sent to all robots in the fleet.

!!! warning Stop All halts every robot in the selected fleet. Use it when you need to bring the whole fleet to a stop quickly.

Next steps